RAM Mounts

Introduced in 1990 as part of National Products Inc. (NPI), RAM® Mounts is the leading manufacturer of rugged and versatile mounting solutions for nearly any application and device – including phones, tablets, cameras, GPS systems, laptops, marine electronics, printers, radios, and much more.

As the most innovative product line of its kind, RAM® Mounts offers approximately 5,000 modular components. Built on the interchangeable ball and socket system and designed around an elastomeric rubber ball, these components incorporate non-slip functionality as well as shock and vibration damping. The unique design of the patent-protected RAM® Mounts system provides quick installation, adjustability, and durability – all at a low cost.

Backed by more than 400 employees, RAM® Mounts is proudly located in Seattle, Washington in the same neighborhood where the company was started. Utilizing the finest assembly hardware, durable composites, stainless steel, rubber, and aluminum, RAM® mounting solutions have been synonymous with quality and performance for more than two decades. No matter where life takes you, depend on RAM®.

Home

Brands

RAM Mounts

Quick-Grip Short Arm Phone Holder Handlebar U-Bolt Base

This version of the spring-loaded RAM® Quick-Grip™ holder provides a secure fit for a variety of regular size phones and other devices. The adjustable side keepers ensure that devices like GPS units and Bluetooth speakers within the listed compatible dime

€47,96€59,95

RAM Mounts

AMPS Pattern Base Plate - B Size Ball

The RAM-B-347U base consists of a B size 2,54 cm (1") diameter rubber ball connected to a 50.8mm x 43.2mm square base. The base has four pre-drilled holes at each corner, using the universal AMPS hole pattern.

PLATE SIZE
50.8mm X 43.2mm

BALL/SOCKET

€9,95

RAM Mounts

Quick-Grip™ Waterproof Wireless Charging Phone Holder | B Size Ball

The RAM Quick-Grip™ Wireless is a patented, universal water resistant wireless charging cradle for phones.

As part of the spring-loaded RAM Quick-Grip™ family, this cradle allows for single-handed placement and removal of your phone while taking advant

€184,99

RAM Mounts

Quick-Grip XL Phone Holder - B-Bal

The RAM Quick-Grip™ device holder is suitable for a wide variety of electronic devices. The spring-loaded mechanism and adjustable side holders ensure a firm grip on your device. Whether it's a cell phone, GPS, blue tooth speaker or anything else that fit

€39,95

RAM Mounts

X-Grip® Phone Holder With Ball Size B | Large Phones

The popular RAM X-Grip® spring-loaded phone holder features an 'X' design that expands and contracts to provide a perfect fit for your device, even when it's in a case. Constructed from powder-coated, marine-grade aluminum, stainless steel components and

€39,95

More information

RAM Mounts

Tough-Claw™ Small Clamp Base - B Size Ball

The RAM Tough-Claw™ is the perfect mounting base for toolless installation and removal on round, square, and odd-shaped rails and bars. The small version of the RAM Tough-Claw™ can quickly be clamped on rails ranging from 1.59cm to 3.81cm in outer diamet

€39,95

RAM Mounts

Quick-Grip Medium Arm Phone Holder Handlebar U-Bolt Base

The RAM Quick-Grip™ Handlebar Mount consists of a zinc coated u-bolt base, double socket arm and spring loaded cradle for supporting most phones. Included in this package is hardware that will accommodate rails from 0.50" to 1.25" in diameter. The base in

€59,95

More information

RAM Mounts

M10x1.25 Threaded Post Base - B Size Ball

The RAM-B-349U includes a M10 x 1.25 pitch male thread connected to a 1" rubber ball. The threaded hole must contain the following dimensions for this base to fit: M10 1.25 pitch with a 14.5mm flange diameter with a 10.15mm thread length.

FEATURES
Uni

€9,95

RAM Mounts

Round Plate - B Size Ball

The RAM-B-202U consists of a B size rubber ball connected to a 64mm diameter round plate. This mounting component includes pre-drilled holes using the universal AMPS hole pattern.
4-Hole AMPS: 30mm x 38mm
3-Hole 120-Degree: 46mm Diameter
Ø 64mm diamete

€9,95

More information

RAM Mounts

Quick-Grip Universal Phone Holder - B-Bal

€34,95

RAM Mounts

U-Bolt Rail Base Ø 12.7mm to 25.4mm - B Size Ball

Ideal for motorcycle handlebars, this base consists of a 1" B size rubber ball attached to a zinc-coated metal U-bolt base. Designed to sit at right angles to the mounting rail, the U-bolt base accommodates rails from .5" to 1" in diameter. Included are b

€24,95

RAM Mounts

X-Grip® Universal Phone Holder - B Size Ball

The popular spring-loaded RAM® X-Grip®® phone holder features an 'X' design that expands and contracts to provide a perfect fit for your device – even if it's in a case. Made of high-strength composite and stainless steel, the RAM® X-Grip®® phone holder i

€34,95

RAM Mounts

Brake/Clutch Reservoir and Handlebar Base - B Size Ball

The RAM-B-309-7U combination handlebar and brake/clutch reservoir base provides the ultimate flexibility for mounting to your motorcycle. Attach the base to either your handlebar or brake/clutch, and achieve near-infinite adjustability and ideal viewing a

€19,96€24,95

RAM Mounts

U-Bolt Rail Base Ø 12.7mm to 31.8mm - B Size Ball

Ideal for motorcycle handlebars, the RAM-B-231ZU consists of a 1" B size rubber ball attached to a zinc-coated metal U-bolt base. Designed to sit at right angles to the mounting rail, the U-bolt base accommodates rails from 12,7mm to 31,75mm in diameter.

€25,95

RAM Mounts

X-Grip® Short Arm Phone Holder with Fork Stem Base

Designed to fit into the cylindrical bore wall of fork stems that measure 12mm to 38mm (.5” to 1.49”) in diameter, the RAM-B-176-A-UN7U consists of a fork stem base, short length double socket arm, and the popular spring-loaded RAM X-Grip® phone holder.

€79,95

RAM Mounts

M8 Bolts Screw-On Clamp Base - B Size Ball

For M8 handlebar bolts, the RAM-B-367U motorcycle handlebar base will replace the existing bolt with a 1" B size ball. This rubber ball base provides shock and vibration damping, and is compatible with a wide variety of B size RAM double socket arms and d

€14,95

RAM Mounts

9mm Holed Bolt Adapter Angled Base - B Size Ball

The RAM-B-272U consists of a B size 2.54mm (1") rubber ball and mounting base measuring 30mm x 19mm x .50.8mm with a 9mm hole. This angled bolt head adapter base is often attached to the mirror frame on motorcycles.

FEATURES
Features a 9mm hole design

€14,95

RAM Mounts

X-Grip® Medium Arm Large Phone Holder with Bar Mount Base

The RAM-B-367-UN10U consists of a motorcycle handlebar clamp base with M8 threads, double socket arm and universal X-Grip® cradle.

This mount will replace one of the M8 bolt heads on your handlebar clamp system, positioning your device clean in the cen

€69,95

RAM Mounts

Large Gas Tank Foot - B-Bal

The RAM Gas Tank Base is a low-profile way to get a unique perspective of your camera or to mount your electronic device where it can be quickly accessed. This powder-coated aluminum base mounts directly to the fuel tank of all compatible motorcycles list

€44,95

RAM Mounts

Doppelter Socket Mittel Arm | Pin-Lock

The RAM-B-201-SU consists of a 1" dia. ball compatible STANDARD LENGTH double socket arm, mixed combination Pin-Lock™ security nut and key knob. RAM® Pin-Lock™ security solutions are designed to withstand the harshest environments where RAM® Mounts are co

€24,95

Unit price: €2,00 /

RAM Mounts

Small Gas Tank Base - B Ball

The RAM Gas Tank base is a low-profile way to get a unique perspective from your camera or to attach your electronic device where it can be quickly accessible. This powder-coated aluminum base mounts directly to the stock gas tank of any listed compatible

€27,96€34,95

RAM Mounts

X-Grip® Short Arm Phone Holder with Large Handlebar Base

Take your mobile entertainment on the road with the new RAM Torque™ handlebar and rail mounting base. We’ve paired a B-sized 1” rubber ball base that accommodates bars 28.6mm to 38.1mm in diameter with a short length arm and the dynamic X-Grip® for phones

€79,95

RAM Mounts

X-Grip® Medium Arm Phone Holder with Bar Mount Base

€64,95

RAM Mounts

Double Socket Arm - Short Length

The RAM-B-201U-A consists of a short double socket arm that accommodates 1" B size ball bases, device holders, and adapters. With an overall length of 61.5mm, this is the lowest profile RAM double socket arm size. The easy to adjust knob allows for near-i

€16,95

RAM Mounts

Quick-Grip Short Arm Phone Holder Handlebar U-Bolt Base

€47,96€59,95

RAM Mounts

AMPS Pattern Base Plate - B Size Ball

€9,95

RAM Mounts

Quick-Grip™ Waterproof Wireless Charging Phone Holder | B Size Ball

€184,99

RAM Mounts

Quick-Grip XL Phone Holder - B-Bal